Men's Biker Jackets by Marbek – Buy Online – Next Day Delivery
Men's Biker Jackets by Marbek – Buy Online – Next Day Delivery
The Marbek men’s Biker Jacket is designed to give the wearer a comfortable and reliable jacket that will withstand the most intensive riding session. The jacket is luxuriously crafted with a 100% lambskin leather outer shell combined with a 100% nylon body lining and 100% polyester sleeve lining. Using these materials will ensure durability, style, and comfortability for the wearer. The jacket will also include two zipped pockets to store any small personal items without the fear of losing them. Also included is heavier padding in the elbow, spine, and shoulder regions to add extra support and safety. The Marbek biker jacket will give anyone who wears it a sleek, stylish, and luxurious look no matter if they are riding a bike or just strolling around town.
The biker jacket is designed to give the appearance of a sophisticated and fashionable fit. The sizes range from extra-small, small, medium, and large. Care instructions along with wash instructions will be provided with all purchases. However, the biker jacket will require professional dry cleaning to extend the durability and longevity of the item.
History of the Biker Jacket
The men’s biker jacket shares the same history as the leather jacket since it is an individualistic spin of the original leather jacket. The leather jacket originated around the early 1900’s and was prized for its heat insulating ability. It was first crafted using a variety of different materialist such as sheepskin, buckskin, or lambskin with a fleece interior which aided in its rising popularity among military personnel, the men who commonly wore these clothing items. Although designed to keep German fighter pilots warm while they were at higher and colder altitudes – many noted the potential leather jackets had as a versatile item. Some of the potential stems from the knowledge that the leather itself is a durable material that, if properly crafted, can also be used as a protective layer.
Specifically, in 1928, the first design of the biker jacket came into existence. The original biker jacket was crafted with the idea of utility and durability for the riders, thus resulting in key changes in the look of the jacket. This jacket featured a diagonal zipper which prevented wind from passing through the jacket, a cropped and snugged fit, deep D-shaped pockets, and lapels which were created to connect to one another.
Unlike the fashion-focused leather jackets – the biker jacket was focused on utility instead of having the most creative patterns and designs. Until the years leading up to the 21st century. Due to its unique construction, rock groups such as The Ramones popularised the biker jacket, thus promoting the beginning of the biker jacket having an updated and more stylistic change.
Biker Jacket Features
As mentioned before, the biker jacket is crafted a 100% lambskin leather outer shell combined with a 100% nylon body lining and 100% polyester sleeve lining, and inner padding, all in which adds to the promised utility and durability of the jacket. This design will help keep the jacket’s intended longevity, as well as add to the comfort that the wearer will receive while they wear this jacket.
Durable Outer Shell
The Marbek biker jacket focuses on having an extremely durable outer shell. An outer shell crafted from 100% lambskin leather is promised to be weather and wind resistant, while also being lightweight enough, so the rider does not feel any discomfort against the elements, while also not sacrificing having a heat insulated jacket interior.
Zippers and Ventilation
A well-structured biker jacket has the ability to keep the wearer warm and dry no matter the weather – but the ability cool down the wearer is just as valuable. The Marbek biker jacket zipper is structured in a way that it can be easily zipped down when needed. The high-quality material also aids in the jacket to be easily ventilated so, if needed, heat can be released, and cool air can filter through.
Although overlooked, the pockets in a biker jacket pocket plays a key role in the functionality of it. It is ideal for a biker jacket to have both deep D-shaper internal pockets and external pockets with zippers to aid in the prevention losing personal items.
Biker Jacket Collar
Leather jackets can come in a variety of collars. It is recommended to make sure that your biker jacket collar is soft, short, can stand up to seal out wind to avoid interference with the helmet, and has a fleece lining. The rule of thumb is to avoid collars that are too rough and ridged to avoid chaffing of the neck or any other discomforts.
Biker Jacket Cuffs
If they jacket does not have well-designed cuffs, wind and other weather elements can get inside the jacket through the end of the sleeves, which defeats the purpose of the other weather-resistant features. It is recommended to look for knit cuffs that can be sealed by zipper, hooks, or snaps. These kinds of cuffs can reduce the possibility of any wind flapping of the sleeves and cuffs.
How to Select the Right Biker Jacket
Choosing the correct size and fit of your biker jacket is a key component that the wearer must consider. The wearer can refer to the Marbek sizing guide to confirm that they have the correct measurements for their shoulder width, back length, sleeve length, waist circumference, and chest circumference. By following this step, it can ensure the wearer has selected the correct size needed for a proper and comfortable fit.
Be certain to take your correct measurements and refer to the sizing guide before making the purchase. The measuring tape should fit comfortably around the area being measured and should not be pulled too tight. Be sure to follow the correct procedure of inserting two fingers between the body and the tape to allow for adequate breathing room.
Overall – Jacket Fit
The overall fit of a biker jacket can have a drastic effect of the aesthetic, comfortability, durability, and functionality for the person wearing it. The wearer should be able to wear additional layering that will not make the jacket fit too tightly. Moreover, the wearer should be able to move their arms in multiple directions to ensure that the jacket is not too stiff against the body. Regarding specifics, the wearer must consider how the jacket fits on the shoulders, sleeves, and consider the possible padding.
It is recommended to choose a jacket that does not have any excise material hanging around the shoulder area, as it can give the wearer a baggier and unprofessional look. Those with thinner frames would benefit from purchasing a jacket with more elasticity as it will give the illusion of having broader shoulders. While broader shoulder people are advised to avoid materials that will stretch around their shoulder which could cause them to appear rounder.
Sleeves are usually easier to find the correct fit. The general rule of thumb is to make sure that the sleeves should come down no longer than the wearer's wrists to avoid the image of the jacket wearing you instead of you wearing it.
The key functionality for wearing a biker jacket is offering the wearer protection against the elements and from harsh injuries in the situation of falling. Many biker jackets come with padding at the higher risk areas: shoulder, elbows, and sometimes the spine. The padding can prevent burns and abrasions that commonly happen in these areas in the event of a crash or falling at high speeds.
Materials Used in Biker Jackets
As mentioned before, many biker jackets are an upgraded version of the common leather jacket. Some of the materials used in biker jackets without padding are 100% lambskin. While, in jackets with padding, they commonly use a man-made fabric called cordura.
This material is more commonplace in modern-day leather jackets and is commonly intermixed with having a fleece lining for extra warmth. The material is soft and lightweight and can be worn throughout every season with comfort. The most important thing to remember with this material is that it must be treated more gently than other forms of leather.
This material is manmade and is used in the production of a variety of products, such as luggage, backpacks, performance apparel, and biker jackets. This fabric is known for its extreme durability and resistance to abrasions, tears, and possible scruffs.
How to Care for a Biker Jacket
It is heavily recommended that the wearer pays close attention to the washing and care instructions provided on the label of the jacket. Each different kind of leather must be treated differently to ensure the longevity of the materials. The wearer shouldn’t be too cautious about getting the jacket wet, as it is made to be worn outside no matter the weather conditions. However, there are some precautions a person can use to avoid damaging the leather after constant exposure to the elements. It is recommended that the wearer avoids drying their leather jacket in high heats, so the material does not become dry and brittle. The most effective and safest way to clean your biker jacket is to take it to get professionally cleaned at a dry cleaner.
It is important to remember that there are two kinds of biker jackets: the ones created for riding which includes padding and a few extra features, and the ones created for style. Thus, making the biker jacket a versatile piece of clothing that anyone who desires a stylish, durable, and comfortable jacket can benefit from.